Quality and Delay Charts of Semblance

The following charts present the semblance values along with the relative delay of those values.

Each table gives the change in values versus the 1:1 comparison. The latter is listed as the "Base" value just above the table. Thus a Base value of .6 and a table entry of .04 means the semblance value for that entry is .64.

For Fields 34EDot

Quality and Delay of x

Quality

Delay

Base = 0.604768

Sa Q	1	2	3	4
1	0.00	0.00	-0.03	-0.01
2	0.00	0.00	-0.03	-0.01
3	-0.04	-0.04	0.12	-0.03
4	-0.03	-0.03	-0.03	0.00

Base = 4440 msec.

Sat Delay	1	2	3	4
1	0	0	588	-5
2	0	0	588	-5
3	-375	-375	0	-361
4	7	7	415	0

Quality and Delay of y

Quality

Delay

Base = 0.619829

Sa Q	1	2	3	4
1	0.00	0.00	-0.05	-0.02
2	0.00	0.00	-0.05	-0.02
3	-0.08	-0.08	0.15	-0.06
4	-0.06	-0.06	-0.06	-0.01

Base = 4440 msec.

Sat Delay	1	2	3	4
1	0	0	585	0
2	0	0	585	0
3	-369	-369	0	-357
4	0	0	377	0

Quality and Delay of z

Quality

Delay

Base = 0.604543

Sa Q	1	2	3	4
1	0.00	0.00	0.00	-0.02
2	0.00	0.00	0.00	-0.02
3	-0.06	-0.06	-0.00	-0.05
4	-0.03	-0.03	0.01	0.00

Base = 4440 msec.

Sat Delay	1	2	3	4
1	0	0	625	138
2	0	0	625	138
3	-560	-560	0	-479
4	-138	-138	487	0

Wm P. Kamp