Quality and Delay Charts of Semblance

The following charts present the semblance values along with the relative delay of those values.

Each table gives the change in values versus the 1:1 comparison. The latter is listed as the "Base" value just above the table. Thus a Base value of .6 and a table entry of .04 means the semblance value for that entry is .64.

For Fields 34E

Quality and Delay of x

Quality

Delay

Base = 0.611931

Sa Q	1	2	3	4
1	0.00	0.00	-0.05	-0.02
2	0.00	0.00	-0.05	-0.02
3	-0.03	-0.03	0.17	-0.02
4	-0.02	-0.02	-0.03	0.05

Base = 5140 msec.

Sat Delay	1	2	3	4
1	0	0	739	128
2	0	0	739	128
3	-602	-602	0	-459
4	-128	-128	400	0

Quality and Delay of y

Quality

Delay

Base = 0.624

Sa Q	1	2	3	4
1	0.00	0.00	-0.06	-0.05
2	0.00	0.00	-0.06	-0.05
3	-0.10	-0.10	0.20	-0.07
4	-0.08	-0.08	-0.06	0.03

Base = 5140 msec.

Sat Delay	1	2	3	4
1	0	0	655	-2
2	0	0	655	-2
3	-566	-566	0	-414
4	-294	-294	382	0

Quality and Delay of z

Quality

Delay

Base = 0.617754

Sa Q	1	2	3	4
1	0.00	0.00	-0.05	-0.03
2	0.00	0.00	-0.05	-0.03
3	-0.02	-0.02	0.21	-0.02
4	-0.04	-0.04	-0.03	0.06

Base = 5140 msec.

Sat Delay	1	2	3	4
1	0	0	739	129
2	0	0	739	129
3	-584	-584	0	-483
4	-128	-128	400	0

Wm P. Kamp