Quality and Delay Charts of Semblance

The following charts present the semblance values along with the relative delay of those values.

Each table gives the change in values versus the 1:1 comparison. The latter is listed as the "Base" value just above the table. Thus a Base value of .6 and a table entry of .04 means the semblance value for that entry is .64.

For Fields 12E

Quality and Delay of x

Quality

Delay

Base = 0.611137

Sa Q	1	2	3	4
1	0.00	0.00	-0.04	-0.01
2	0.00	0.00	-0.04	-0.01
3	-0.03	-0.03	0.21	-0.01
4	-0.03	-0.03	-0.04	0.03

Base = 5134 msec.

Sat Delay	1	2	3	4
1	0	0	702	215
2	0	0	702	215
3	-566	-566	0	-472
4	-169	-169	379	0

Quality and Delay of y

Quality

Delay

Base = 0.621391

Sa Q	1	2	3	4
1	0.00	0.00	-0.07	-0.04
2	0.00	0.00	-0.07	-0.04
3	-0.09	-0.09	0.22	-0.06
4	-0.08	-0.08	-0.04	0.03

Base = 5134 msec.

Sat Delay	1	2	3	4
1	0	0	294	122
2	0	0	294	122
3	-566	-566	0	-415
4	-294	-294	380	0

Quality and Delay of z

Quality

Delay

Base = 0.614572

Sa Q	1	2	3	4
1	0.00	0.00	-0.04	-0.03
2	0.00	0.00	-0.04	-0.03
3	-0.04	-0.04	0.23	-0.03
4	-0.02	-0.02	-0.02	0.06

Base = 5134 msec.

Sat Delay	1	2	3	4
1	0	0	739	128
2	0	0	739	128
3	-584	-584	0	-472
4	-169	-169	379	0

Wm P. Kamp